Bender Racing Vmax 4 Motor , Pipes

MM800

New member
Bender Racing Vmax 4 Motor , Pipes Now With Pics!

Got a a comple 180 Bender Racing motor with Bender Quads, clutch, carbs and the 180 electrical. Originally built in 92. Pipes have been hand sanded and ceramic painted with high temp. $2500.00 OBOIMG_2301.JPGIMG_2303.JPGIMG_2304.JPGIMG_2305.JPGIMG_2307.JPGIMG_2308.JPGIMG_2309.JPGIMG_2310.JPGIMG_2311.JPGIMG_2312.JPGIMG_2313.JPGIMG_2314.JPGIMG_2315.JPGIMG_2316.JPGIMG_2317.JPG
 
Last edited:

It was the full set up offered in 92. Back when Tim Bender and Bruce Schrader were there. It has the complete clutch, Reichard box, (for the 180 degree crank), coils, air box, Bender Quad pipes, bored carbs, (I believe they are 33.5 MM) pull start. 2500.00IMG_2318.JPGIMG_2321.JPGIMG_2323.JPGIMG_2325.JPGIMG_2326.JPGIMG_2327.JPGIMG_2328.JPGIMG_2329.JPGIMG_2332.JPGIMG_2333.JPGIMG_2334.JPG
 
Last edited:
Im trying to get more info. It appears the box is a high rpm box. The pipes are all welded at the seams and not stamped. I think this may be the complete F111 set up.
 
Yes, they are in pairs. I was told the regular Bender quads were stamped at the seams and the F111 were welded. These are welded. I've tried to locate pictures of the F111 so as to be able to compare . If anyone wants to chime in that would be great.
 
Looking back on an old thread, in 1994 Bender catalogue, the F111 pipes were offered with open stingers and or silenced ends. Unless, I misunderstood the thread????
 


Back
Top