Quad Pipe Question that is not addressed in the forum

At sea level PSI Quads call for 132 mains in the 800. Bender calls for 145s. What gives? That?s a big difference.

132 are too lean for shure. Run stock jet with PSI.

Yeah, I'd start out with stock jetting, and take some plug reads (and note the outside temps when doing so).. If it happens to be in the upper 20's (lets say 29F for example) when doing a plug chop/read, and the plugs appear to read perfect!..
that could mean a possible burn down while blasting across a lake in the single digits..
Better safe then sorry! Start big, and work your way down..
and run GOOD gas!. premium minimal..

138.8

srx600 said:

At sea level PSI Quads call for 132 mains in the 800. Bender calls for 145s. What gives? That?s a big difference.

Click to expand...

I've been looking for bender quad jetting specs for the 800, can anyone confirm the jetting that is called for? Definitely 145s? What about nozzles, pilots, air screw, etc?