Bore and Stroke info needed?

[SamueLJackson]

Ok yammie freaks I need to know bore and stroke of two engines.

1. Exciter 570 -89

2. Vmax 600 -96

And if someone knows can i use vmax gyt twin pipes with Exciter engine what mods are needed???

-sami-

 

[vmax4rules]

Exciter 570 is 569(cc) 73x68(mm)
Vmax 600 is 598(cc) 74.8x68(mm)

Looks like to bottom ends are the same, not sure about about the pipe question though.

 

[SamueLJackson]

So will vmax cylinders fit to exciter bottom end??

:drink1: :drink1: :drink1:

 

[Vmax540]

So will vmax cylinders fit to exciter bottom end??

:drink1: :drink1: :drink1:

No, other cylinders will fit that I am aware of ! ? ! All the GYT and aftermarket twin pipes for the 1994-96 Vmax 5/600's that I've heard of were very had to jet, keep running cleanly and very peaky ? I used a Reichards Performance PRO-pipe on my Exciter in the 80's which made loads of torque ! I later installed their quieter pipe which was named Stealth.

 

[vmax4rules]

I had a 1987 Exciter with a PSI single pipe and a 1990 Exciter with PSI twins, both sleds ran awesome with no issues.

Very lightweight for the day and a blast to ride,
if the Vmax-4 did not come out in late 1991 I would still own at least one of those Exciters today.