Swapping 800 secondary, jack shaft, and chaincase into a 92 750

[BillWi]

I have a complete 800 secondary jack shaft and chain case with sprocket and chain from a 1995 800. I want to swap it into my 92 750. Is it a straight forward swap or does some modification have to be done to the 92 to make it fit? Anyone done this. Any pointers. I would appreciate any help.

Thanks
Bill

 

[Ken]

Do you have the 95 secondary clutch, you will need that too.

Ken

 

[BillWi]

Yes I forgot to mention that. I have the secondary. Pretty much everything from a 95 800.

 

[Mr. Speed]

rustman has the bearing and oil seal numbers it is rite on the money.....willy

 

[vmax4rules]

I have a complete 800 secondary jack shaft and chain case with sprocket and chain from a 1995 800. I want to swap it into my 92 750. Is it a straight forward swap or does some modification have to be done to the 92 to make it fit? Anyone done this. Any pointers. I would appreciate any help.

Thanks
Bill

Do you have the drive axle asm as well, if so you should be good to go - I did the same swap back in the late 90's.