Clutching+jetting help wanted

[J-Max4]

I have -92 750 with 800 pipes, slight porting, one layer head gasket and I need some help with clutch and jet setup. I can easily get only OEM parts here in in Finland. So what parts should I buy? My clutches are now stock and they suck. :cussing:

What is the 800 stock jetting? I have 143 main jet, but what are the idlejets in 800 and should i change my needles too?

Thanks

Juha

[Brad]

j-max4 - stock main jet 143.8, pilot (slow) jet 47.5, idle mixture screw
1-1/2 turns out, jet needle 6gn20, ( clip position) 3.

[J-Max4]

Thanks Brad. Is the clip position counted from the top or bottom? Clutching, anyone?

Juha :xmas-smil

[racer7x]

3 rd clip position is the middle one.

[Reimond]

Some one will post soon.... Check Yammiegod (http://www.vmax4.com/techmain.htm) hot set-up :)