96 XT/GYT SKID BEARINGS? VmaxRules...you out there?

[ALLSEASONRIDER]

Does anyone know the bearing size of the four wheels pictured in the above skid?

According to the parts schematics (Port Yamaha) the front wheels have different part #s for both bearing and wheels vs the ones toward the rear. I didnt measure them but they look to be the same size on all four of these.

I believe they are a standard size like 6205 or whatever so I would like to source them at a reasonable cost vs Yamaha $$$.

If memory serves me correctly, Vmax4Rules has the same skid as I do so I hope you are out there.

[rustman]

Not sure of the bearing size but I did find a very cheap source for bearings. I paid about 1.50 each delivered. here is their ebay store, 10 at a time seems to be the best deal, unless you need a hundred, then price goes down. If you take one out, the number will be on the seal.

http://stores.ebay.com/usabearingsandbelts

[robtan88]

If you look up the likes of Royal Distributing on line (they are mail order), you can buy like 10 bearings for $30. These are econo bearings if your not looking to spend much, or on a fixed budget. They usually offer these bearings in bulk if they are common sized bearings. Worth looking into. Hope this helps...Rob.

[ALLSEASONRIDER]

Thanks guys for the info.

I have a good local source for the bearings just don't know the size.....they have every bearing on the planet, just not a good way to cross-reference to a sled....

[vmax4rules]

6004 bearing is 20mm ID x 42mm OD x 12mm wide

[ALLSEASONRIDER]

Thanks Rules! I figured in 23K miles you probably changed a few and would know the answer...tomorrow a trip to the bearing man!

[vmax4rules]

Thanks Rules! I figured in 23K miles you probably changed a few and would know the answer...tomorrow a trip to the bearing man!

Your welcome and a happy belated birthday to ya!

[ALLSEASONRIDER]

Your welcome and a happy belated birthday to ya!

Thanks Rules! Got the bearings today, now just got to get them in