gear ?

[jminor]

did they make a 40 tooth gear?

[Busted Max]

i have one so it was made. just depends by who.

[jminor]

wanna sell it??

[YAMMIEGOD 3:16]

YAMAHA DID NOT MAKE A 40 TOOTH FOR A VMAX 800. 39 WAS BIGGEST. !! 3:16 (tony)

[Skinner]

Tony, ya beat me to it, however, I was going to ask what the 40 tooth was for,,,750?? I have heard of guys having gears cut for the high rpm motors, probably a wire EDM. Could the gear be custom made??

Skinner

[jminor]

I did'nt think so either guys but if he had one and wanted to sell it I would have been all over it! Just a thought but what about a group buy on 40 tooth gears I'm sure between us we know someone who could make them, I know someone very capable but it would'nt be worth the trouble for one.

[Brakes]

I can have them made for cheap,let me know who is interested.

[VMAX80096]

I have a 41 aluminum 13 wide that I raced on the grass...and I won't be needing it anymore.

[YAMMIEGOD 3:16]

HUGH, NEVER LIKED ALUMINUM GEARS. GUESS ITS JUST ME. RAN THEM YEARS AGO IN MY OLD SRX,s, BUT NOT IN THIS STIFF. DID TRY ONE IN MY 00 SRX. HAD TO FLUSH CHAINCASE OUT AFTER EVERYTIME OUT. 3:16 (tony)
JOSH, 21/39 BEST SET-UP FOR 800.

[yammiman]

Can you still buy new gears for the V-Max 800's? If so, who has them?

[YAMMIEGOD 3:16]

YAMAHA. MAYBE HAUCK. GEARS FOR THE VMAX 4,s ARE HAARD TO COME BY. 3:16 (tony)

[Skinner]

Can you still buy new gears for the V-Max 800's? If so, who has them?

OEM Yamaha, about 120.00 for the lower and around 65.00 for the uppers
Your local dealer should be able to get them for you and YES they are still available

Skinner

[YAMMIEGOD 3:16]

JOSH, I POSTED BEFORE I THOUGHT, 21/39 FOR 500 F.T. !! ANYTHING FARTHER GO BACK UP ON TOP TO 22. IF I WAS RUNNING 1000 F.T. OR 1/4 MILE, I WOULD PROBLEY GO WITH 23/37. IF YOU WANT TO RUN A 39 BOTTOM AT JACOBEYS, I,LL BRING YA ONE BUT YOU CHANGE IT. 3:16 (tony)

[jminor]

JOSH, I POSTED BEFORE I THOUGHT, 21/39 FOR 500 F.T. !! ANYTHING FARTHER GO BACK UP ON TOP TO 22. IF I WAS RUNNING 1000 F.T. OR 1/4 MILE, I WOULD PROBLEY GO WITH 23/37. IF YOU WANT TO RUN A 39 BOTTOM AT JACOBEYS, I,LL BRING YA ONE BUT YOU CHANGE IT. 3:16 (tony)

Tony I know you mentioned using the 39 I was just looking for other options is all, I am still looking to buy a 39 as well.

[VMAX80096]

Hum, I ran aluminum gear bottom on the vmax 2 yrs ...never saw any filings, oil by end of season was slightly grey...gear doesn't look that bad...just what I found.

[Busted Max]

wanna sell it??

sorry lol need it for my mtn mod. just looking for a 20 top to go with it. i may be puttin on a 162" maverick so i dont think my 35 tooth is going to spin it lol

[YAMMIEGOD 3:16]

HUGH, MY SRX CHAINCASE LUBE HAD SILVER STREAKS. I THINK THE CHAIN CAUSE THIS. I WENT BACK TOO 700 SX GEARS. 3:16 (tony)

[jminor]

Busted Max you know I had to try!! Where did you get it anyways?

[Busted Max]

it came all the way from alaska lol from justin pleier

[jminor]

is this for a 750 or 800? If its for an 800 do you know if there are more?

[Busted Max]

its for the 750.

try http://www.erlandsonperformance.com/new/index.php i got gears for my vmax 600 there.

[jminor]

makes sense now, thanks.