1994 600?

[lance0730]

the guy i bought my 96MM 800 from (great sled!) has a 1994 Vmax 600
with a whopping 1200 original miles on it.. its looks brand new/showroom.

I am considering purchasing it he only wants 1200.00 for it.. what mods can be installed to make it faster than 90MPH?

[mid 90's v max]

pipes will wake them up. 94 600 stock=90hp 96 pipe and jetting=98hp GYT or similar twins=107hp FYI

[lance0730]

pipes will wake them up. 94 600 stock=90hp 96 pipe and jetting=98hp GYT or similar twins=107hp FYI

thanks for the details..!

[squeezemore]

Just to keep you aware that if you put twin pipes on that '94 600 be sure to update to a '95 flywheel because the '95 is set up to run a higher rpm for the twin pipes. If you don't update you could run into a very bad harmonic balance and destroy clutches and pistons in a matter of 200 miles no joke been there done that.

[Ike]

PM SamueLJackson. He´s done alot with the 600 twins.

Ike

[steven_in_the_up]

A few years ago, right before I got my Vmax4, I owned a 94 600 max. It had Bender twins on it. Fast as lightning, Till it seezed up going 70. Was jetted WAY to lean, But I didn't know about that stuff then. Literally GAVE the pipes away when some guy asked for them. He got the carbs too. Later, he gave me $60 for the pipes and carbs. Sometimes I wish I had not done that.

[AL P]

Ohh if I only had a nickle for everything I`ve let slip away for little or nothing..

looking back..I could kick myself in the ace for some of the what nots I`ve parted with, only to regret it BIG TIME..

AL

[Exciter570]

Set it up right, watch your plugs, you'll be fine. I've been running GYT twins on my '95 600 for a few seasons, no issues. Great pipes, sled ran right with a Rev 600 HO last season.