Yamigod I need your trail clutch setup [Archive]

bly123

11-09-2005, 02:51 PM

Sorry to ask you this. I know you have posted it 100 times before but I think all those posts are gone now. I am getting the blue spring, I already have the helix what primary weights do I need for your tail clutch setup for the 92 750? And do you know where I can get some? Also, do I need to grind the cover or spring on the primary? I think I remember seeing something about that before. And what spring or spring setting do I need on the secondary?

YAMMIEGOD 3:16

11-09-2005, 07:51 PM

DUDE, GET 89A-10 WEIGHTS, RUN 13.9 RIVET IN BACK, 13.3 IN TIP. SET YOUR BACK CLUTCH AT B-3. WHAT HELIX YOU HAVE ? I BELIEVE YA NEED 43-37. YOU MAY NEED TO RUN 800 COVER ON PRIMARY WITH THAT HAUCK BLUE. THERE WAS SOME SPRING BIND PROBLEMS ON 750. ENGAGEMENT SHOULD BE NO LOWER THAN 4500. WATCH YOUR RPM, SHOULD BE NO MORE THAN 8350, MAY HAVE TOO FINE TUNE ! 3:16 (tony)

bly123

11-09-2005, 08:03 PM

The spring I am getting is an older Hauck blue one from around 1999 or 2000. It's the light blue one. Does that one have the binding problem? I thought I read it was with the newer blue springs. I have the 43/37 upgrade helix already. Where do I buy the weights from? Does any body have a used set they want to sell? If I were to buy them new where do I buy them from? And how much do they go for?

YAMMIEGOD 3:16

11-09-2005, 08:09 PM

DUDE, PULL WEIGHTS OUT OF YOUR 92, TELL ME WHAT THEY ARE. THEY SHOULD BE 89A-00. IF THEY ARE, YOU PROBLEY CAN GET AWAY WITH THESE FOR A FAST TRAIL KIT. INSTALL PRIMARY SPRING AND SET-UP SECONDARY, YOU MIGHT BE PRETTY CLOSE. ! 3:16 (tony)

Aless750

11-10-2005, 11:47 AM

Yammiegod, is the optional factory yamaha 42-37 helix gonna do the job? thanks

YAMMIEGOD 3:16

11-10-2005, 12:16 PM

THAT WILL WORK FINE. START IN LOCATION B-3. !! 3:16 (tony)

Aless750

11-10-2005, 12:25 PM

Hey yammiegod, i just wanted to say thanks-a-lot for all the info that you are posting, its really helpfull. thanks a bunch. Alex

bly123

11-11-2005, 02:23 PM

Yamigod, Thanks for the info. I'll just put the blue spring in, check the secondary spring position and let you know how it is in a month from now. Thanks again!

YAMMIEGOD 3:16

11-11-2005, 05:51 PM

OK, NEVER BE AFRAID TOO ASK IF YA HAVE ANY PROBLEMS. !! 3:16 (tony)

bly123

11-13-2005, 09:45 AM

Is there going to be a new Mods folder for stuff like this? Also will the old mods info ever be restored or is all that knowledge out ther with Elvis forever?

racer7x

11-13-2005, 09:52 AM

Is there going to be a new Mods folder for stuff like this? Also will the old mods info ever be restored or is all that knowledge out ther with Elvis forever?

I will add this to the setups page..
Still unsure about the old stuff...:(

jayman54

01-12-2011, 10:55 PM

I'm in the same boat with my 92 but i have a yamaha w-w-w spring which i believe u said is very close... i pulled my weights and they were 89a-00 but they had 2 holes and there was only 1 rivet in it... so should i just knock it out and run the 13.9 RIVET IN BACK, 13.3 IN TIP... do you have the part numbers for those rivets can i can order them from my local Yamaha...

jayman54

01-12-2011, 11:02 PM

42/37 is the helix

YAMMIEGOD 3:16

01-13-2011, 08:17 AM

JAYMAN , THAT INFO IS CORRECT. run these rivets with that w-w-w and helix you posted
13.9 -90261-06034-00
13.3-90261 -06019-00
3:16 (yammie tony)

jayman54

01-13-2011, 06:56 PM

thanx really appreciate the help... so with those having only one rivet where they the ones that were supposed to be changed up the clutching update on the 92? i was just wondering what weight the one rivet is in it now??

luke1656

01-30-2011, 02:35 PM

yammiegod im looking for a clutch set up also i need to wake up my beast i do mostly trail riding but alot of guys take shit that the sled is old and slow especialy new artic cat guys need some help

AL P

01-30-2011, 05:44 PM

I just cut and pasted this from the tech section..this is yammiegod`s clutching..

95 - 96 VMAX 800 Clutching
8BU WEIGHTS. (stock )
HAUCKS BLUE PRIMARY
OR W-W-W YAMAHA SPRING
49-43 HELIX @ 1-6 70 DEGREE
SILVER (stock ) spring
1997 VMAX 800
8BU-10 (stock)
HAUCK BLUE SPRING
OR W-W-W YAMAHA SPRING
49-43 HELIX @70 DEGREE
SILVER ( stock ) SPRING.
8350 IS PEAK RPM ON STOCK 750 TWINS AND STOCK 800 TWINS. CLUTCH FOR IT. ( thanks daman)
THESE ARE GREAT FAST TRAIL / LAKE RUNNING CLUTCH SET-UPS ...

luke1656

01-30-2011, 08:57 PM

how do i get all these parts or where can i get this done at

speedmax4

01-30-2011, 09:17 PM

Look up www.hauckspowersportsinc.com (http://www.hauckspowersportsinc.com) and you can find the parts you need...............Tom

luke1656

01-30-2011, 09:21 PM

thanks but im not really familiar with clutches how hard is it to get done

AL P

01-30-2011, 09:24 PM

VERY easy!!!
even a caveman could do it..LOL

seriously, there`s nothing to it...