Few Questions - New to the Board

[davet]

Hi Guys, got my 95 VMax-4 earlier this year and i need a few things, wondering where i can get them:

1) the Foam seals for around the airbox intake
2) new Ski Skins

thanks in advance

[vmax4rules]

Hi Guys, got my 95 VMax-4 earlier this year and i need a few things, wondering where i can get them:

1) the Foam seals for around the airbox intake
2) new Ski Skins

thanks in advance

Welcome!!

The seals are a dealer item.

The skins can be found in the aftermarket as well as at the dealer.

[davet]

thanks, any idea which aftermarket place carries the skins, my local place has the skins that cover the whole bottom, not the ones that are narrower and slide in the under-side channel.

[vmax4rules]

A local place here in Gaylord Michigan carries them or at least they did the last time I checked.

Here is the name and number: Sled Shed 1-989-731-2858

[davet]

Thanks alot....dealer wants $168. Canadian for them (EACH !)

Gaskets are cheaper....$12 each

[fastmax]

Welcome to the forum Davet, where are you located??

Sent you a pm.

:schild27:

[mark the shark]

Welcome to the site! :welcome:

The last time I got some was a NOS auction on ebay for $35/pair, so I bought 6 pair. They're made by Sno-Stuff. I found them here: http://www.sno-stuff.com/frame2.html

Shark

[davet]

Thanks For the link to Sno-Stuff

Thanks Bruce for you PM...

Great Help.

Im in Ontario Canada near Barrie.


Anyone Know what colour Skins my Machine should have, ie what it had fromthe factory? did the 95 Black Vmax4 come with any specific colour ?

[4with4]

The factory skins were red.

Ian

[blue800]

i got mine from yamaha last winter red or black avail. they also have the extra thick one's i think i payed $68 per pair

[mark the shark]

They're getting more expensive and harder to find. I put a set on a few years ago and one was worn through after 100 miles from riding on marginal snow, so I started making protectors out of plastic pipe. I've posted these pictures before, but here they are again. I've had the same set of skins on for about 4 years now.

Shark

[4with4]

The original owner of my sled rode mostly the mountains in Revelstoke BC. He put a wide Black skin that fit the bottom of the ski on for better floatation. As far as I can tell, the red skins that fit inside the ski are the originals. This year I'm going to need new carbides and I'll be checking the skins as well.

Ian

[davet]

thanks Guys, appreciate the Help

[Busted Max]

i got bravo or venture? skins on my 600. a drill bit and some body weight was all i needed to fitt em up. and now they float awsome. they stick out almost an inch on each side of the ski.