Anyone use Dial A Jet System??

[racerrob]

So, has anyone here used the Dial A Jet system??

If so on a Vmax 4??

How about on other sleds??

Any feed back from the "real world" scenario??:2dontknow

[vmax4rules]

I have it on all 3 of my sleds (2-Vmax-4's and a 700SX)

Basically it came on my 700SX and I like the way it worked with the extra fuel mileage and adjustability of jetting options, so I added it to both of my V4's.

It's always nice to have the option of changing your jetting specs (2 clicks for both richer and leaner) for reliability as well as purging your float bowls.

There are other alternatives (Tempaflow/Variflow) that might be as good or better but since I already have these and have had no issues I see no reason to change.

[turbogriesbach]

Had it on an old SRV worked well.

[allarson]

i used it on my vmax 600 94 worked very well saved on fuel and was very quick on top end sled did 150kmh i, going to be puting it on my vmax4 800 1996 this winter

[allarson]

i would not use temp flow on v max unless u whant to burn the sled down as thats what happend to mine moved 1 click on the dial and i burned it down and that was with 155 main jets i took it off and now i have 143 mains in it and i,m fine allso use digitron so i know that works fine. exhaust temp is 1250 . good for -20

[VMAX535]

Rob, check out some of the posts on this thread http://www.vmax4.com/vbulletin/showthread.php?t=2562&highlight=dial+jet

[SRV540]

do you mean dial a jet??? or tempa flow??? what way was it turned??? recommended to turn 1/8 turn clockwise to run from there and dial in....counter clock wise will lean to much if not jetted correct in the first place to -29F on the tempa flow



i would not use temp flow on v max unless u whant to burn the sled down as thats what happend to mine moved 1 click on the dial and i burned it down and that was with 155 main jets i took it off and now i have 143 mains in it and i,m fine allso use digitron so i know that works fine. exhaust temp is 1250 . good for -20