Viper Mtn Mod 162

[AK MTN VMAX4]

This summer I just bought an 02 Viper blue with a 121 that was still in the crate for $4200. I set out to buy a custom MPI tunnel for a 162 track length, Bender triple pipes, VForce3 reeds, Holtzman ATAAC, new Maverick Camoplast 162x2.25x16, putting a Summit suspension on with rail extensions, 2 8in flame billet wheels by PEM, and a Freedom axle kit to use the big wheels with allowing me to run 2,3,or 4 wheels on the rear of my suspension, I also put a blue mtn bar by Fabcraft, some of the new blue Yamaha mtn skis, and a left hand throttle onof my kits.

More pics later, Justin

[racer7x]

Looking good Justin.!!:):):)

[Ike]

That is cool Justin!:bowdown:

How much did that tunnel weight?

Ike

[AK MTN VMAX4]

I am not sure on the tunnel weight but they MPI said that the kit is ssupposed to shave 12 -15 lbs off of the mtn viper

[vmax4sean]

THATS NICE!!! I see you have a phazer back there.

[4with4]

Look'n good Justin. Those pipes are really suppose to wake the Viper up. Something like 30 hp I've been told. Does that sound right to you?

Ian

[vmax4rules]

Looks real good!

[racer7x]

Sean, Thats an Exciter..

[vmax4rules]

Sean, Thats an Exciter..

Looks like a 92' Exciter II

[AK MTN VMAX4]

Hey all, took the first test ride ran decent still have some clutching to do ran the stock secondary and settings, and Polaris primary with 60 g and an almond/blue spring turned 45 mph track speed while climbing while turning the 162x16x2.25 and running 7500-8000 rpm instead of 8600 where the Bender pipes make their peak power. so at least 600 off peak all the time. Will tune a biit next time will have that PEM secondary back to tune with sent it out to get a new hubto match my Vipers jackshaft. that will make iit perform way better here s a pic.

PS the pipes make about 33 hp

[AL P]

Thats looks like it would climb the mountain like there`s no tomaro! right on.

[Ike]

So, comparing it to your V4... How does the Viper stand out? Better handling for sure, but about that power then?

Looking really good!

Ike

[vmax4sean]

WOW! How much did that cost you to do?

[AK MTN VMAX4]

Power wise not as powerful but close I can throw it around easier. I think I have a total with buying the sled and everything $8500-8700. So really to much money tied up in it but it turned out great. I know there is more performance to be found in it with the clutching being that far off. Later

[AK MTN VMAX4]

I just recently got the aftermarket secondary that I was running on my V4 on there and went up into the mtns and tried a 7 different combos of weights springs and helixes. Got about 2 real good setups that hold rpms and pull real hard. Here is another pic of it with the decals off.