St's and 136 Conversions

[Ken]

I'm looking for any pictures of the a factory ST or an extended 136" Vmax-4. Interested in the tunnel extension, skid, mounting points, rear cooler, anything you've got.

Thanks, Ken

[racerrob]

Ken, here are some pics of the stock skid when it was still in my sled along with tunnel pics when I was doing the RX-1 conversion. You can kind of see the addtional gusseting & brackets that are on the ST's frames.
The last pic here actually shows the tunnel with the new skid, but you can make out how the tunnel is extended to a certain degree.

If you would like, when I get back home this weekend, I could do some specific close up shots of the tunnel as I did not remove any of the oem brackets & gussets. Hope this helps you a bit.

Rob

[Ken]

Thanks Rob!!

[fastmax]

Here is my 93 136, and 96 141, The tunnel extension on the 93 is pretty much the same as my st. I did cut and re-weld the rear cooler flat on the 93.The cooler on the 96 st is flat from the factory, let me know if you need anything or any other angles of pics Ken.

[Ken]

Thanks Fastmax!!

In your bottom photo it looks like you have double wide tunnel coolers?

[buickboy92]

Ken, here are some pics of the stock skid when it was still in my sled along with tunnel pics when I was doing the RX-1 conversion. You can kind of see the addtional gusseting & brackets that are on the ST's frames.
The last pic here actually shows the tunnel with the new skid, but you can make out how the tunnel is extended to a certain degree.

If you would like, when I get back home this weekend, I could do some specific close up shots of the tunnel as I did not remove any of the oem brackets & gussets. Hope this helps you a bit.

Rob

what kind of suspension is that?