CaptJager
10-16-2009, 10:31 PM
I RAN THIS SET UP IN MY 95 STOCKER ON THE GRASS AND RAN 86 MPH IN 500 F.T. AND 89 MPH ON ICE IN 500 F.T.
1. HAUCK '' ORANGE '' PRIMARY SPRING WITH ONE SHIM.
2. STOCK 8BU- 00 WEIGHTS '' NOTCHED '' FOR ENGAGEMENT. USE STOCK RIVETS. ENGAGEMENT SHOULD BE NO LOWER THAN 5000.
3. RUN A 52/42 HELIX IN SECONDARY @ 1-6 OR 70 DEGREE.
4. RUN '' STOCK SILVER CODE'' SECONDARY SPRING.
5. 20/39 GEARING FOR 400 F.T.
6. 21/39 GEARING FOR 500 F.T.
7. 22/39 GEARING FOR 660 F.T. note. if you run this distance go to 49/43 helix.
8. DROP MAINS TO 128 ACROSS THE BOARD. have other jet specs if needed.
9. START OUT WITH AT LEAST 192 WOODY'S CHISELS. YOU CAN USE THE NEW '' 1.060 '' CHISEL WITHOUT A PROBLEM. WORK SUSP. ACCORDING TOO DRIVER WEIGHT AND STARTING LINE CONDITIONS.
THIS SETUP ONLY FOR V MAX 4 800 STOCKER.
YAMMIEGOD 3:16
1. HAUCK '' ORANGE '' PRIMARY SPRING WITH ONE SHIM.
2. STOCK 8BU- 00 WEIGHTS '' NOTCHED '' FOR ENGAGEMENT. USE STOCK RIVETS. ENGAGEMENT SHOULD BE NO LOWER THAN 5000.
3. RUN A 52/42 HELIX IN SECONDARY @ 1-6 OR 70 DEGREE.
4. RUN '' STOCK SILVER CODE'' SECONDARY SPRING.
5. 20/39 GEARING FOR 400 F.T.
6. 21/39 GEARING FOR 500 F.T.
7. 22/39 GEARING FOR 660 F.T. note. if you run this distance go to 49/43 helix.
8. DROP MAINS TO 128 ACROSS THE BOARD. have other jet specs if needed.
9. START OUT WITH AT LEAST 192 WOODY'S CHISELS. YOU CAN USE THE NEW '' 1.060 '' CHISEL WITHOUT A PROBLEM. WORK SUSP. ACCORDING TOO DRIVER WEIGHT AND STARTING LINE CONDITIONS.
THIS SETUP ONLY FOR V MAX 4 800 STOCKER.
YAMMIEGOD 3:16