Make your own stingers???

[fixerman519]

Is there anyone that has measurments to make you own set of stingers for 750 pipes, I know it is better to buy a set but I cant find any.Thanks for the help

[RX1]

Stingers were interchangeable between 750's and 800's right?

[vmax4rules]

Stingers were interchangeable between 750's and 800's right?

That is correct

[Reddy]

I'm looking for some measurements too..

Actually, I just need the inner pipe and outlet pipe diameter.

[Reddy]

How long is for example a bender stinger, the silencer part...??

[speedmax4]

The silencer part on both of mine is 13 inches long and 2 3/4 inch tubing.

[Reddy]

The silencer part on both of mine is 13 inches long and 2 3/4 inch tubing.

Thanks!

Now I just need the inner pipe diameter..

[speedmax4]

Just happen to have a set of Benders apart to repack. The inner is a perforated pipe approx. 1 1/4 inch. Attached a couple of pictures. Hope that helps. Tom

[Reddy]

That helps alot.. Thanks again, Tom!

It seems that the outlet pipe is approximately the same diameter as the inner pipe.

[Reddy]

Just happen to have a set of Benders apart to repack. The inner is a perforated pipe approx. 1 1/4 inch. Attached a couple of pictures. Hope that helps. Tom

Btw, did you take that measure from inside or outside the pipe?

[speedmax4]

Outside of pipe. The inner pipe is not perfectly round. He's made the inner pipe from what was a perforated flat sheet and rolled it into pipe and then tack welded it in for or five places down the seam............Tom

[mjdevries]

I like these stingers.

5792

[Reddy]

I got my home made stinger almost ready today and I´m quite happy with the result.. Just some finishing up to do and they´re good to go.

http://i999.photobucket.com/albums/af118/RedHotAddy/stingers1.jpg?t=1289848423


http://i999.photobucket.com/albums/af118/RedHotAddy/stingers2.jpg?t=1289848357

[dillonwegner]

Looking good Reddy! , im fixin to make me a set of stingers over next summer hopefully hope they work well

Dillon

[Reddy]

Looking good Reddy! , im fixin to make me a set of stingers over next summer hopefully hope they work well

Dillon


Thanks!

Those weigh about 9 lbs or 4kg less than the original silencer. Next thing to do is a fiberglass hood.

[rustman]

looks cool..now we need to hear how they sound!

[Reddy]

now we need to hear how they sound!

Hopefully that´s going to happen soon. Still need some parts for the engine before testing.

[Reddy]

Updated the sound/video clip.. Check the last post.

[rustman]

i like it, sounds alot like the bender stingers on one of my 93's. Nice work!

[v4eva]

very nice

[Reddy]

Here´s a better clip of the stingers..

Click here (http://s999.photobucket.com/albums/af118/RedHotAddy/?action=view&current=27112010046.mp4)