PDA

View Full Version : ProAction Upgrade pics


bly123
12-06-2005, 10:33 AM
Since we lost all the old pics for an upgrade a to ProAction suspension I though I would re-post some of the detailed setup pics I had from when I did mine. It might help make it easier to understand how it's done. Let me remind you that all the mounting hole mesurements are from this website's mod page witch is still available. So between these pics and the mesurements you should have an easy time of it.
bly123
12-06-2005, 10:36 AM
More...
Ike
12-06-2005, 11:18 AM
:goodp: Thank you!

Ike
KRUSTY
12-06-2005, 12:27 PM
Thanks alot, just about to do mine & the pics sure help.
SRV540
12-06-2005, 05:57 PM
Looking good Bly123, thank for the informative pictures, I beilve you said in a ealier post that this is not a longtravel proaction?? Nice job by the way!
vmax4sean
12-06-2005, 07:43 PM
Looks good.. Riveting always works!
Busted Max
12-06-2005, 08:39 PM
thank you! i am about ready to put in a 03 rx1 159"

need all the info i can get.
bly123
12-06-2005, 08:52 PM
It turns out that this was a long travel. I just mounted it up higher inside the tunnel than others have. Has the same amout of travel but sits a little lower.
SRV540
12-06-2005, 09:20 PM
Bly did you replave the front rear shock spring for the vmax 4 weight???



It turns out that this was a long travel. I just mounted it up higher inside the tunnel than others have. Has the same amout of travel but sits a little lower.
bly123
12-07-2005, 10:44 AM
No, I did 2 things. 1.) I used the old spring from the front of the 92 suspension because it was a stiffer spring made for the Vmax-4's extra engine weight. 2.) I accualy put a 1" spacer inside the TSS cans to put more preload on the springs. That should work very well for me since I weigh in a 225 lb's