'92 to '94 swap

[Massey Man]

I've swapped a '92 engine into my '94 sled and was wondering what the best way to connect the ignition plugs was. The connectors aren't the same. Are there adaptors available or do I have to splice them together? If they need to be spliced, which colors go to what?

[fixerman519]

most are the same coulours, if I remember right. then there will be 1 on each end that dont match but there is none left so they go together ( If I remember right )

[Massey Man]

I'll double check about the colors. I'm just looking for the cleanest way to put them together, I guess I could take the mating connectors off of the bad '94 engine...

[Massey Man]

There's about 3 or 4 wires that don't match. I'm sure someone has done this before? Help!

[Pinto 018]

I Just took the ignition housing off the 94 and swaped it with the 92 when i did mine.

[Massey Man]

I Just took the ignition housing off the 94 and swaped it with the 92 when i did mine.

I just got done doing the same thing. I had to mix and match the last 3 wires to get the lights to work, but everything is good to go now!