proaction setup

[Aless750]

I have a 03 rx1 skid in my 94 750, i would just like to know aprox. how much preload i should put on the front spring and how long i should put the limiter straps.
Is it also normal that on a flat surface (my garage) if i lift the sled and set it back on the ground the rear of the track dosent touch the ground.

thanks a lot

[mark the shark]

It's normal for the back of the track to be slightly off the floor with no weight on it. It should sit flat or very close to it with the weight of the rider on the sled.
Lots of good suspension info here.

http://www.cabler.com/corey/y_suspn.html
http://hem.passagen.se/rogg/yamsetup/startsida_eng.htm

Shark