CaptJager
Moderator
99 SRX REAR SUSPENSION
This is my 92 V-MAX 4 with 99 SRX Pro Action rear suspension.Click photos for enlarged view.
#1 Rear Mount has been taken off and remounted 4 1/2 inches forward from the original position.
#2
Number 2 is the center upper idler shaft, it has been re-drilled 8 1/2 inches back from the original front mount and 4 1/2 inches down from the top of the tunnel. (directly below where the seat and dash cowling meet)
NOTE :: 99 SRX suspension is roughly 1/2 inch narrower then the stock 92 V-Max skid, so spacers must be fabricated to make up the difference. 1/4 inch for each side. #3 Front H arm mount is relocated to under the hood in front of the foot rest.More photos and measurements to follow.
This is just inside the left side footwell.
Just inside the right side footwell.
