clutch set-up

[Robs96max4]

looking at going back to stock pipes, would this change my clutch set-up with my psi's? i have WSW 8BU with 2 steel weights at 58 grams and engagement at around 5000rpm... maxx roller secondery with silver and a 48-38 helix..

 

[sxrsist]

i think all you will have to do is weight up your weights and maybe put a w-w-w in it

 

[Robs96max4]

my weights are 58 grams, with steel rivets in both holes..

 

[Robs96max4]

guessing by the weight i would have 17.2 inner and 17.2 tip... now the question is could i grind 3.5 grams off the tip rivet?

 

[Mr. Speed]

If you are going back to stock exhaust go white, white, white on your primary spring - pull the tip weight out - leave the hole empty and go to B3 on your secondary and then start playing from there.

 

[Robs96max4]

thank-you

 

[sxrsist]

his is a 06 he doesnt have the old secondary.

 

[Robs96max4]

would the maxx roller and a stock secondary be different set-ups in the primary, i think the roller just backshifts quicker doesn't it? Lyle I will give DHL a call to see about pick up..