NOS Parts - Updated

[Ken]

See Last Post for Updates

NOS Yamaha Parts in original packaging
8BU Drive Belt - $65.00 (list $122.50) - SOLD
89A-17688-10 1992 Secondary Ramp Shoes (set of 3) – $65.00 (selling on ebay 40.00-104.00 per shoe) - SOLD
8AX-17605-10 1992-94 Primary Clutch Weights (set of 3) - $55.00 (list $38.43 ea) - SOLD
94880-08068 1993/94 15-Plate 68-Link Drive Chain - $65.00 (list $149.89)
8AX-11311-00 93/94 750 Cylinder - $225.00 (list $563.71)
89A-21983-00 R/F Nose Panel Black - $65.00 (list $384.42) - SOLD
SHP-TUNL2-PR-OT - 750 Tunnel Protectors - $65.00 (no longer available - hyfax that slides on heat exchangers) - SOLD
8K2-47530-00 Black OEM Rear Idler Wheels (2) - $60.00 (list 65.24 ea)

Used Yamaha Parts
89A-17684-A0 42/37 Helix - 1992 Secondary - $30.00 (small nick on one ramp) - SOLD
Hauck 43/37 cut helix – 1992 Secondary - $55.00 (couple of scratches, very little use) - SOLD
49/46/39 cut helix – 1993/94 Secondary - $55.00 (couple of scratches, very little use)
1994 Secondary clutch, Teflon bushings, yellow spring, 38 helix - $75.00 (good upgrade for 92/93) - SOLD
8AX-17682-00 1993/94 20 Tooth top chain case gear - $25.00 (less than 200km of use)

I can ship from Canada or US, shipping will be very fair.
If you want pictures or more information just ask.

 

[AL P]

Ken, is that NOS 8bu belt in good shape? has it been setting/hanging in a hot garage for years, or??..
just wondering if it`s a bit stuff, and posibley dry rotted or?

whats the full numbers on it?

thanks!

 

[Ken]

Al......it's been chewed on a little by mice.

I haven't had it very long so I don't know it's history. It's 8BU-17641-01-00, it looks good to me, it has the grey/red cardboard sleeve, not the older blue/white one, or the newer plastic bag.

Ken

 

[ALLSEASONRIDER]

Al......it's been chewed on a little by mice.

Ken

Al you have to admit that's funny!!:smilielol

 

[AL P]

hahaha!!!

perfect!....LOL

I dont have pay pal myself, so I always have my sister do the pay pal stuff...will you PM me your pay pal info? or do you preffer a money order?

thanks ken.....

 

[peterg]

im really intrested in the secondary clutch set up if i can afford the primary work needed if any at all ? or if that 43-37 helix will work on my 93. just wanna run a nice trail setup thanks

 

[mark the shark]

Al......it's been chewed on a little by mice.

That one made me laugh out loud!:rotflmao: :rotflmao::rotflmao:

Ken, you're a shrewd salesman, baiting Big Al like that with the mouse in the picture. If you want to sell the rest of your parts you should post pictures of everything with little mice chewing on them!

Shark

 

[Ken]

hahaha!!!

perfect!....LOL

I dont have pay pal myself, so I always have my sister do the pay pal stuff...will you PM me your pay pal info? or do you preffer a money order?

thanks ken.....

Al,

I went out in the garage this morning and a giant grey mouse was checking out the belt...........on a serious note, someone else already has first chance at it, I will let you know if they don't take it.

Ken

 

[Ken]

im really intrested in the secondary clutch set up if i can afford the primary work needed if any at all ? or if that 43-37 helix will work on my 93. just wanna run a nice trail setup thanks

Shouldn't have to make any changes to the primary that I am aware of, it's a stock 94 secondary, Yamaha just improved the large and small bushings using teflon impregnated ones. What is the condition of your current seconday and what helix is in it? The 43/37 is for a 92 Secondary, the splines are different on the 93/94 secondaries, and it is already spoken for. Here are some photos of the secondary.

 

[peterg]

thanks for responding ken. my secondary is fine its all stock i think its a 38 degree helix. i was trying to run yammigods trail clutch set up hes got posted in the tec section for 92 93 94 stock pipe????? i cant find that 43/37 helix anywhere so im gonna give up on trying to make that work. i know nothing about clutching so just looking for a nice trail set up thats not gonna be to exspensive. thanks for the help

 

[Ken]

Peter,

The 42/37 is also a very good helix, it is the Yamaha factory multi angle. The 43/37 was a bit more aggressive version that was cut by Hauck. Have a good look at the helix on your sled because if there is an A die stamped on it, then it is a 42/37 helix. Do you have any photos of the inside of your secondary? The 92 secondaries were updated by Yamaha under warranty, some were missed, if yours wasn't done then you would want the 94 secondary.

Kne

 

[peterg]

there is no A or R stamped on my helix its a 38 degree helix and i have a 1993 not a 1992 vmax. i cant type that well so thats probably part of the issue.

 

[Ken]

Al, I sent you a pm. Ken

 

[AL P]

just got it and replied ken, thanks..

sorry for the delay, been pretty busy the last few days...

AL

 

[Ken]

42/37 Helix

Here are the photos of the 42/37 helix. You can see the slight nick, mid way on the ramp on the upper left side of the photo.

 

[Ken]

NOS Yamaha Parts in original packaging

94880-08068 1993/94 15-Plate 68-Link Drive Chain - $65.00 (list $149.89)
- will include the 20T top gear listed below

8AX-11311-00 93/94 750 Cylinder - $225.00 (list $563.71)
- $200.00 shipping included to the lower 48

89A-21983-00 R/F Nose Panel Black - $65.00 (list $384.42) - SOLD
- $60.00 & shipping included to the lower 48

8K2-47530-00 Black OEM Rear Idler Wheels (2) - $60.00 (list 65.24 ea)
- both wheels for $60.00

Used Yamaha Parts

49/46/39 Custom cut helix – 1993/94 Secondary - $55.00 (couple of scratches, very little use)
- will include shipping to lower 48
- this was cut for Yamaha testing back in the day
- I used it for snow and ice drags and I was pleased with the results

1994 Secondary clutch, Teflon bushings, yellow spring, 38 helix - $75.00 (good upgrade for 92/93) - SOLD
- I will either include the shipping to the lower 48 or throw in a new set of ramp shoes.

8AX-17682-00 1993/94 20 Tooth top chain case gear - $25.00 (less than 200km of use)
- free with the chain.

 

[Big Bore 904]

Ken,

I'll take that secondary if you still have it.

Thanks,

Paul S.

 

[Jeff Wurl]

I will take the NOS right front nose panel if you still have it. Email me at jwurl@triad.rr.com Thanks, Jeff

 

[Ken]

NOS Yamaha Parts in original packaging

94880-08068 1993/94 15-Plate 68-Link Drive Chain - $65.00 (list $149.89)
- will include 20T top gear that has 200km on it

8AX-11311-00 93/94 750 Cylinder - $225.00 (list $563.71)
- $200.00 shipping included to the lower 48

8K2-47530-00 Black OEM Rear Idler Wheels (2) - $60.00 (list 65.24 ea)
- both wheels for $60.00

Used Yamaha Parts

49/46/39 Custom cut helix – 1993/94 Secondary - $55.00 (couple of scratches, very little use)
- will include shipping to lower 48
- this was cut for Yamaha testing back in the day
- I used it for snow and ice drags and I was pleased with the results


Unfortunately US Customs now want anything from Canada that is brought into the US to be a commercial export, which would be an added $10.75 fee plus the paper work. They can also charge duty on anything from Japan. So I probably won't be selling any more parts to the US.