Master of Faster
New member
Decided to play around with the stock exhaust on my RX tonight to see if I could improve it myself, just can't justify the $400 on an aftermarket setup for the little gain.
I cut it open, chopped out one pipe and a couple baffle cones, then drilled 88 1/2" holes in the pipes and welded it back up. I've done one for a turbo where I totally gutted it, but I think this will be a good comprimise, shouldn't be too loud for the trail, I will see if there is any performance change if there is ever any snow again. :2dontknow
http://media.putfile.com/RX-1-exhaust-clip
I cut it open, chopped out one pipe and a couple baffle cones, then drilled 88 1/2" holes in the pipes and welded it back up. I've done one for a turbo where I totally gutted it, but I think this will be a good comprimise, shouldn't be too loud for the trail, I will see if there is any performance change if there is ever any snow again. :2dontknow
http://media.putfile.com/RX-1-exhaust-clip