RX-1 clutching? again

[YAMMIEGOD 3:16]

TURK, I,LL SET-UP DEAN,S SECONDARY AT JACOBEYS. I AM SHURE I HAVE SILVER !! THATS STOCK VMAX 800. WHAT LOCATION 1-6 ? !! 3:16 (tony)

 

[YAMMIEGOD 3:16]

OK, I SEE WHERE YOU SAY 2-6 !! 3:16 (tony)

 

[racer7x]

How about running stock primary weights? Any ideas ?

 

[Master of Faster]

You can pull the tip rivet out and they work pretty good I've heard, never did try it myself.

 

[Master of Faster]

Another solid setup is Dalton 60gr weights, with Blk/Blu or Blk/Silver Dalton primary spring, silver Yamaha secondary with a Dalton 52r46 helix.

Dalton makes some good stuff, their weights just aren't adjustable, but they're ALOT cheaper than HH's

 

[Turk]

I could not get good top end with Dalton stuff & tested em a lot for about 2-3 weeks. They ran strong to about 80 mph & then fell off. I have used stock 8df RX-1 weights & removing the tip or 1st hole weight worked well. Removing the tip=slightly better backshift for trail riding & removing the inner = hard acceleration & good top end but lacking in backshift. I got hh,s to work a lot better then Dalton weights.

 

[cat eater]

Tony

Tony is there a way i can talk to your freind .I'm looking for some more top end , for my 04 warrior ,clutching and gears can he help with this thanks Rick