Search results

Im looking for a set of race pipes and maching cdi for our just4fun powersports 01 srx race sled. will pay cash or if u need some thing, we might have it laying around. thanks

Here's how its made.. I used a piece of nylon but you could use whatever you have around like wood or steel. Drill and tapp two holes in one end of the block far enough apart to accomidate a standard razor blade. Then cut out a semi-circle between the two holes you just made. Now add...

Fine Tuning The FAST M-10 Suspension While time spent tuning and adjusting any suspension will increase the enjoyment of your new scooter, it will be especially rewarding on sleds with a FAST M-10. A properly dialed in M-10 will most likely provide the best ride comfort and control you have...

have anyone pulled a primary apart? if so is there a easy or safe way of doing it, i now that the back plate needs to be theaded off but im scared of clamping it in the vise and recking the clutch. any opinions?

im looking for a good 95 800 primary, roller secondary, quad 750 pipes and 800 cdi. 800 jack or mid saft and interested in any one with some extra gears and odd ball chains for the 750 and 800 drives to clomplete the colection. also exvert drivers for a 1inch driver, m 10 or simular skid frames...

a buddy of my runs a 1998 srx 700 and after closer inspection found the driver bearing was shot and the short exention in between the speedo gear and driver axle was sheered off deep inside the axle, PROBLEM? dose anyone now a easy way to remove it, tried pics, scews... dont whant to remove the...

ok i have a 99 srx 700 and the belt is so tight it is burning on the center shiv ofthe primary at idle and dosnt alow the belt to ride to the top of the clutch. as far as i can tell there is no ajustment on the motor mounts and the little bar on the clutch side of the motor that atacheds to...

i have a stock skid for my 92 750, looking for help setting it up to grag on ice, eg... limmiter strap lenth, shock&spring tention, 2,3,4 wheels in rear axle, over all ride hight, add or remove boggies. ill be running a 121x15x1/2 preditor race track with 96 1 inch ice picks and 144 1 inch ice...