Search results

I have a used asphalt track 136. It was 15 wide I cut it down and is now 10 7/8. Does not many runs on it. 200.00 shipped us 250.00 Canada.

Asphalt skies. Homemade to nhra specs. I used a 4"x2" wheel. The wheels have maybe 4 runs on them. This wheel I was using would last 3 years with running 14 events a year. The rubber is same duromiter rating as whal. These skis were on a Polaris, 2 arctic cats, and a yamaha v max 4. Plates have...

This is a used fuel cell I made for my 1995 max4. I gutted the tank and cut out to and fit this tank in its place. I holds around 3/4 gallon. I used it for 1/4 mile asphalt racing. Made gram 1/4 aluminum with self venting flip gas cap. It has 2 hose barbs for both fuel pumps. Thanks Ray...

I am looking for a good used 10.5 asphalt track. Let me know how much shipped to 81503 colorado. Thanks Ray

I have some parts to sell off my 1995 vmax 4 800 asphalt sled. Lowering tubes with clutch springs and cut down cover tubes. 125.00 shipped hydraulic brake assy. Brake assy is off a 1999 zrt 600 arctic cat. Brake bracket bolts into holes from old brake assy. Brake caliper has new pads...

This is a used 1995 vmax 4 800 engine in running sled. Engine runs very good. I have it in a asphalt drag sled. Don't know miles no speedo. Have run 1/4 mile for 3 mounths with it. I bought this motor off the vmax 4 forum from Carl laponte. Got update on miles from Carl. 1640 Miles Motor comes...

I need a primary clutch for a 1995 vmax4 800. I am hopping for a good price on one. need for asphalt racing. My clutch has big cracks in it. I have a huge state champion ship wally race next weekend. Price shipped to 81503 Colorado.Thanks Ray

I am wondering on clutch weight and rivets to rpm. I put a different motor in bone stock, not getting the rpms that i did with old motor. I have 8bu weights with 2 steel rivets in them. 59 grams punched out rivets and now 49 grams. it seems like I was only getting 7900 rpm. I tried to hadjust...

I am putting in a new used moter. mine went boom. I am wondering on the oil pump injection. should I leave pump on or remove and premix gas. I only asphalt race this sled. Thanks Ray

What do I do to notch my weights. Thanks Ray

I am testing today. I have gotten bog pretty good. But now my pipes are rpm out. I have tried town to a 3-2 twist 50. and still rpmd out. the 3-3 worked best but rpm went to high. I have a 48-40 helix. what is the next step to keep rpm down. Thanks Ray

Tested sled today, what a struggle. I ported cylinders with the race logic template. I have a bog out of the hole, cannot figure out how to get it out. 137.5 mains 60 piolets air needle 4 turns tried from 1/2 to 4 no better or worse 136 track I have the bigger needle tubes dont rember the #...

Any one use a 2 step launch control. I will be going to the las vegas et finals this year. They haave a sled bike class and I can use a 2 step. Just not sure wich one to buy. Thanks Ray

Has any one done any timing advance for asphalt. Was wondering if a banshee advance key would work. Thanks Ray

Just wondering on my asphalt sled if it would be a good idea to change to 10 tooth drivers. Would I have to gear change.Thanks Ray

Well I just ran my last race of a 15 race season. Started off on my Vmax4 and it blew up half way through the year. Then I switched to my Daughters Apex powerd Jr Comp Dragster. Went to 4 finals 2 on the sled and 2 in the dragster and won 2 races in the dragster. One of the wins was for a...

Well I have been racing my Daughters comp car the last two races since I blew my sled up. Let me tell you it has not been an easy transition to got from a squize throttle to a foot throttle. But some how I found the right touch on Saturday night and went 7 rounds to win my First Walley. What an...

I am going to do a top end on my asphalt sled. I orderd base gaskets from Hauck. I orderd part #HVX4CBG-39. Should be .39 Base gasket. When I checked thickness they are .029. is this normal or Did I get sent the wrong ones or am I not messuring right. Thanks Ray

I am in need of a used 800 piston. I scored one at the last race, I am looking for a used you to put back in to finish the year out. I am going to top end motor this winter. How much shipped to 81503 Thanks Ray

Well I hurt my sled this last weekend. I think I got it to hot and did some ring damage. I am doing a compreshion check tomarow. I went from a 11.20 to a 11.92 and not running well at all. I am going to do a top end. Wondering what changes I should do. I have seen many post on the base gaskets...